Pp/Pe/Hdpe Grille Mesh Uniaxial Plastic Geogrid/Pe One-Way Geogrid For Protective Soil
Uniaxial Plastic Geogrid Introduction
The unidirectional geogrid is a kind of high molecular polymer as the main raw material, adding certain anti-ultraviolet, anti-aging additives, after unidirectional stretching, the originally distributed chain-shaped molecules are re-orientated and arranged in a linear state. It is a high-strength geotechnical material that is pressed into a thin plate and punched with regular meshes, and then stretched longitudinally. . In this process, the polymer becomes a directional linear state and forms an oblong network integral structure with uniform distribution and high node strength.
Uniaxial Plastic Geogrid Specification
| Properties |
GG60PP |
GG80PP |
GG110PP |
GG150PP |
GG260PP |
GG300PP |
| Tensile Strength (kN/m) |
60 |
80 |
110 |
150 |
260 |
300 |
| Elongation Ratio |
≤10% |
≤10% |
≤10% |
≤10% |
≤10% |
≤10% |
| Strength at 2% Elongation (≥kN/m) |
17 |
26 |
32 |
45 |
94 |
105 |
| Strength at 5% Elongation (≥kN/m) |
35 |
48 |
64 |
90 |
185 |
195 |
| Roll Length (m) |
100 |
100 |
50 |
50 |
50 |
50 |
| Roll Width (m) |
1-3 |
1-3 |
1-3 |
1-3 |
1-3 |
1-3 |
Uniaxial Plastic Geogrid Feature
1. The polymer is in the shape of a directional line, forming a long oval network structure with uniform distribution and high node strength. This structure has quite high tensile strength and rigidity, and provides ideal bearing capacity and diffusion interlocking system for the soil.
2. The outstanding advantage of unidirectional plastic geogrid is that it has a small tendency to deform (creep) under long-term continuous load, and its creep resistance is much better than other materials, which plays an important role in improving the service life of the project.
3. The occlusion and interlocking of the grid and the soil constitutes an efficient stress transmission mechanism, which enables the local load to be quickly and effectively spread to a large area of soil, thereby reducing local damage stress and increasing the service life of the project.
Plastic Uniaxial Geogrid Fuction
1. One-way geogrid is used to reinforce weak foundations: Geogrids can quickly increase the bearing capacity of foundations, control the development of settlement, and confine the road base to effectively distribute the load to a wider base. Thereby reducing the thickness of the base layer, lowering the project cost, shortening the construction period and prolonging the service life.
2. One-way geogrid is used to reinforce asphalt or cement pavement: the geogrid is laid on the bottom of asphalt or cement pavement, which can reduce rutting depth, prolong the fatigue life of the pavement, and reduce the thickness of asphalt or cement pavement to save cost.
3. The unidirectional geogrid is used to reinforce the embankment dam and the retaining wall: the traditional embankment, especially the high embankment, often needs to be overfilled and the edge of the shoulder is not easy to compact, which will cause the slope to be flooded and collapsed in the later stage. The phenomenon of instability occurs from time to time, and at the same time, a gentle slope is required, which covers a large area, and the retaining wall has the same problem. The use of geogrids to reinforce the embankment slope or retaining wall can reduce the area occupied by half. Area, extend the service life, reduce the cost by 20-50%.
4. Unidirectional geogrid is used to reinforce rivers and sea dikes: it can be made into stone cages, and then used together with grids to prevent the dam from being washed by seawater and cause collapse. The stone cages are permeable, can slow down the impact of waves, prolong the life of the dam, and save Manpower and material resources shorten the construction period.
5. One-way geogrid is used to treat garbage landfills: the combination of geogrid and other soil composite materials to treat garbage landfills can effectively solve the problems of uneven foundation settlement and derived gas emissions, and can maximize The storage capacity of the landfill.
Uniaxial Plastic Geogrid Usage
Unidirectional stretching geogrid is used to reinforce the embankment dam slope and retaining wall: the traditional embankment, especially the high embankment, often needs to be overfilled and the edge of the shoulder is not easy to compact, which leads to the rainwater infiltration and collapse of the slope in the later period. The phenomenon of instability occurs from time to time, and at the same time, a gentle slope is required, which covers a large area, and the retaining wall has the same problem. The use of geogrids to reinforce the embankment slope or retaining wall can reduce the area occupied by half. Area, extend the service life, reduce the cost by 20-50%; unidirectional stretching geogrid can also be used to strengthen rivers and sea dikes: it can be made into a stone cage, and then used with the grid to prevent the dike from being washed by sea water and cause collapse. The cage has permeability, can slow down the impact of waves, extend the life of the dam, save manpower and material resources, and shorten the construction period.
Construction method of one-way geogrid:
Construction method of one-way geogrid:
When used on roadbeds and pavements, the construction method is the same as the two-way geogrid. When used for reinforced soil retaining walls, the construction methods are as follows: 1. Set up the foundation and carry out construction according to the designed wall system. When precast reinforced concrete panels are selected, they are generally supported on a precast concrete foundation with a thickness of 12-15 cm. The width is not more than 30cm, the thickness is not less than 20cm, and the buried depth is not less than 60cm to prevent the influence of frost heave of the foundation.
3. For laying of reinforcements, the main strength direction of the reinforcements should be perpendicular to the wall and fixed with pins. isD Feicheng Lianyi Engineering Plastics Co., Ltd.
4. The wall shall be filled with soil by mechanical filling, and the distance between the wheel and the reinforcement shall be kept at least 15 cm. After compaction, a layer of soil is about 20-15 cm thick. isD Feicheng Lianyi Engineering Plastics Co., Ltd.
5. During wall construction, geotextiles should be covered on the wall to prevent leakage of the fill.
Company introduction:
Hengquan company was established in 2013, has become one of the leading and professional manufacture of many kinds of Geosynthetics and wire mesh.
(such as:Geocell,Geotextile,Geomembrane, Geogrid,, ,Gabion box,Welded wire mesh panel) in the world market. We got quality control to make sure every product be in good quality, which can make sure that any bad products will not sent to clients.
We got customers from American, Canada, Russia,Gemany and over 20 countries and enjoy good reputation.
Welcome to contact.
Leo
Manager of Hengquan company
Phone/Whatsapp/Wechat: +8615030705799
